[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR212.231]

[Page 103-104]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 212_STATE SAFETY PARTICIPATION REGULATIONS--Table of Contents
 
                  Subpart C_State Inspection Personnel
 
Sec.  212.231  Highway-rail grade crossing inspector.

    (a) The highway-rail grade crossing inspector is required, at a 
minimum, to be able to conduct independent inspections of all types of 
highway-rail grade crossing warning systems for the purpose of 
determining compliance with Grade Crossing Signal System Safety Rules 
(49 CFR part 234), to make reports of those inspections, and to 
recommend institution of enforcement actions when appropriate to promote 
compliance.
    (b) The highway-rail grade crossing inspector is required, at a 
minimum, to have at least four years of recent experience in highway-
rail grade crossing

[[Page 104]]

construction or maintenance. A bachelor's degree in engineering or a 
related technical specialization may be substituted for two of the four 
years of this experience requirement. Successful completion of an 
apprentice training program under Sec.  212.233 may be substituted for 
the four years of this experience requirement.
    (c) The highway-rail grade crossing inspector shall demonstrate the 
following specific qualifications:
    (1) A comprehensive knowledge of highway-rail grade crossing 
nomenclature, inspection techniques, maintenance requirements, and 
methods;
    (2) The ability to understand and detect deviations from:
    (i) Grade crossing signal system maintenance, inspection and testing 
standards accepted in the industry; and
    (ii) The Grade Crossing Signal System Safety Rules (49 CFR part 
234);
    (3) Knowledge of operating practices and highway-rail grade crossing 
systems sufficient to understand the safety significance of deviations 
and combinations of deviations from Sec.  212.231(c)(2) (i) and (ii);
    (4) Specialized knowledge of the requirements of the Grade Crossing 
Signal System Safety Rules (49 CFR part 234), including the remedial 
action required to bring highway-rail grade crossing signal systems into 
compliance with those Rules;
    (5) Specialized knowledge of highway-rail grade crossing standards 
contained in the Manual on Uniform Traffic Control Devices; and
    (6) Knowledge of railroad signal systems sufficient to ensure that 
highway-rail grade crossing warning systems and inspections of those 
systems do not adversely affect the safety of railroad signal systems.
    (d) A State signal and train control inspector qualified under this 
part and who has demonstrated the ability to understand and detect 
deviations from the Grade Crossing Signal System Safety Rules (49 CFR 
part 234) is deemed to meet all requirements of this section and is 
qualified to conduct independent inspections of all types of highway-
rail grade crossing warning systems for the purpose of determining 
compliance with Grade Crossing Signal System Safety Rules (49 CFR part 
234), to make reports of those inspections, and to recommend institution 
of enforcement actions when appropriate to promote compliance.

[59 FR 50104, Sept. 30, 1994]