[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR214.113]

[Page 167-168]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 214_RAILROAD WORKPLACE SAFETY--Table of Contents
 
                Subpart B_Bridge Worker Safety Standards
 
Sec.  214.113  Head protection.

    (a) Railroad bridge workers working in areas where there is a 
possible danger of head injury from impact, or from falling or flying 
objects, or from electrical shock and burns, shall be provided and shall 
wear protective helmets.
    (b) Helmets for the protection of railroad bridge workers against 
impact and penetration of falling and flying objects, or from high 
voltage electrical shock and burns shall conform to the national 
consensus standards for industrial head protection (American National 
Standards Institute, Z89.1-1986, Protective Headwear for Industrial 
Workers). This incorporation by reference was approved by the Director 
of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR 
part 51. Copies may be obtained from the American National Standards 
Institute, 25 West 43rd Street, New York, NY 10036. Copies may be 
inspected at the Federal Railroad Administration, Docket Clerk, 1120 
Vermont Avenue NW., Washington, DC, or at the National Archives and 
Records Administration (NARA). For information on the availability of 
this material at NARA, call 202-741-6030, or go to: http://
www.archives.gov/federal--register/

[[Page 168]]

code--of--federal--regulations/ibr--locations.html.

[67 FR 1908, Jan. 15, 2002]