[Code of Federal Regulations]
[Title 24, Volume 5]
[Revised as of April 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 24CFR3280.6]

[Page 111]
 
                 TITLE 24--HOUSING AND URBAN DEVELOPMENT
 
 CHAPTER XX--OFFICE OF ASSISTANT SECRETARY FOR HOUSING--FEDERAL HOUSING 
        COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT
 
PART 3280_MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS--Table of Contents
 
                            Subpart A_General
 
Sec. 3280.6  Serial number.

    (a) A manufactured home serial number which will identify the 
manufacturer and the state in which the manufactured home is 
manufactured, must be stamped into the foremost cross member. Letters 
and numbers must be \3/8\ inch minimum in height. Numbers must not be 
stamped into hitch assembly or drawbar.

[[Page 112]]