[Code of Federal Regulations]
[Title 14, Volume 2]
[Revised as of January 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR121.95]

[Page 738]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION 
                               (CONTINUED)
 
PART 121_OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS--
 
       Subpart E_Approval of Routes: Domestic and Flag Operations
 
Sec. 121.95  Route width.

    (a) Approved routes and route segments over U.S. Federal airways or 
foreign airways (and advisory routes in the case of certificate holders 
conducting flag operations) have a width equal to the designated width 
of those airways or routes. Whenever the Administrator finds it 
necessary to determine the width of other approved routes, he considers 
the following:
    (1) Terrain clearance.
    (2) Minimum en route altitudes.
    (3) Ground and airborne navigation aids.
    (4) Air traffic density.
    (5) ATC procedures.
    (b) Any route widths of other approved routes determined by the 
Administrator are specified in the certificate holder's operations 
specifications.

[Doc. No. 6258, 29 FR 19194, Dec. 31, 1964, as amended by Amdt. 121-253, 
61 FR 2610, Jan. 26, 1996]