[Code of Federal Regulations]
[Title 37, Volume 1]
[Revised as of July 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 37CFR2.53]

[Page 251]
 
              TITLE 37--PATENTS, TRADEMARKS, AND COPYRIGHTS
 
  CHAPTER I--UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF 
                                COMMERCE
 
PART 2_RULES OF PRACTICE IN TRADEMARK CASES--Table of Contents
 
Sec. 2.53  Requirements for drawings filed through the TEAS.

    The drawing must meet the requirements of Sec. 2.52. In addition, 
in a TEAS submission, the drawing must meet the following requirements:
    (a)(1) Standard character drawings in TEAS Plus applications filed 
under Sec. 2.22: If an applicant is filing a standard character 
drawing, the applicant must enter the mark in the appropriate field on 
the TEAS Plus form.
    (2) Standard character drawings in all other TEAS submissions: If an 
applicant is filing a standard character drawing, the applicant must 
either:
    (i) Enter the mark in the appropriate field on the TEAS form; or
    (ii) Attach a digitized image of the mark to the TEAS submission 
that meets the requirements of paragraph (c) of this section, and check 
the box to claim that the mark consists of standard characters.
    (b) Special form drawings: If an applicant is filing a special form 
drawing, the applicant must attach a digitized image of the mark to the 
TEAS submission that meets the requirements of paragraph (c) of this 
section.
    (c) Requirements for digitized image: The image must be in .jpg 
format and scanned at no less than 300 dots per inch and no more than 
350 dots per inch with a length and width of no less than 250 pixels and 
no more than 944 pixels. All lines must be clean, sharp and solid, not 
fine or crowded, and produce a high quality image when copied.

[68 FR 55764, Sept. 26, 2003, as amended at 70 FR 38774, July 6, 2005]