[Code of Federal Regulations]
[Title 37, Volume 1]
[Revised as of July 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 37CFR2.54]

[Page 251]
 
              TITLE 37--PATENTS, TRADEMARKS, AND COPYRIGHTS
 
  CHAPTER I--UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF 
                                COMMERCE
 
PART 2_RULES OF PRACTICE IN TRADEMARK CASES--Table of Contents
 
Sec. 2.54  Requirements for drawings submitted on paper.

    The drawing must meet the requirements of Sec. 2.52. In addition, 
in a paper submission, the drawing should:
    (a) Be on non-shiny white paper that is separate from the 
application;
    (b) Be on paper that is 8 to 8.5 inches (20.3 to 21.6 cm.) wide and 
11 to 11.69 inches (27.9 to 29.7 cm.) long. One of the shorter sides of 
the sheet should be regarded as its top edge. The image must be no 
larger than 3.15 inches (8 cm) high by 3.15 inches (8 cm) wide;
    (c) Include the caption ``DRAWING PAGE'' at the top of the drawing 
beginning one inch (2.5 cm.) from the top edge; and
    (d) Depict the mark in black ink, or in color if color is claimed as 
a feature of the mark.
    (e) Drawings must be typed or made with a pen or by a process that 
will provide high definition when copied. A photolithographic, printer's 
proof copy, or other high quality reproduction of the mark may be used. 
All lines must be clean, sharp and solid, and must not be fine or 
crowded.

[68 FR 55764, Sept. 26, 2003]