[Code of Federal Regulations]
[Title 47, Volume 2]
[Revised as of October 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 47CFR36.125]

[Page 467-468]
 
                       TITLE 47--TELECOMMUNICATION
 
        CHAPTER I--FEDERAL COMMUNICATIONS COMMISSION (CONTINUED)
 
PART 36_JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR \
 
                  Subpart B_Telecommunications Property
 
Sec. 36.125  Local switching equipment--Category 3.

    (a) Local switching equipment is included in accounts 2210, 2211, 
and 2212. It comprises all central office switching equipment not 
assigned other categories. Examples of local switching equipment are 
basic switching train, toll connecting trunk equipment, interlocal 
trunks, tandem trunks, terminating senders used for toll completion, 
toll completing train, call reverting equipment, weather and time of day 
service equipment, and switching equipment at electronic analog or 
digital remote line locations. Equipment used for the identification, 
recording and timing of customer dialed charge traffic, or switched 
private line traffic (e.g. transmitters, recorders, call identity 
indexers, perforators, ticketers, detectors, mastertimes) switchboards 
used solely for recording of calling telephone numbers in connection 
with customer dialed charge traffic, or switched private line traffic 
(or both) is included in this local switching category. Equipment 
provided and used primarily for operator dialed toll or customer dialed 
charge traffic except such equipment included in Category 2 Tandem 
Switching Equipment is also included in this local switching category. 
This includes such items as directors translators, sender registers, out 
trunk selectors and facilities for toll intercepting and digit 
absorption. Special services switching equipment which primarily 
performs the switching function for special services (e.g. switching 
equipment, TWX concentrators and switchboards) is also included in this 
local switching category.
    (1) Local office, as used in Sec. 36.125, comprises one or more 
local switching entities of the same equipment type (e.g., step-by-step, 
No. 5 Crossbar) in an individual location. A local switching entity 
comprises that local central office equipment of the same type which has 
a common intermediate distributing frame, market group or other 
separately identifiable switching unit serving one or more prefixes (NNX 
codes).
    (2) A host/remote local switching complex is composed of an 
electronic analog or digital host office and all of its remote 
locations. A host/remote local switching complex is treated as one local 
office. The current jurisdictional definition of an exchange will apply.
    (3) Dial equipment minutes of use (DEM) is defined as the minutes of 
holding time of the originating and terminating local switching 
equipment. Holding time is defined in the Glossary.
    (4) The interstate allocation factor is the percentage of local 
switching investment apportioned to the interstate jurisdiction.
    (5) The interstate DEM factor is the ratio of the interstate DEM to 
the total DEM. A weighted interstate DEM

[[Page 468]]

factor is the product of multiplying a weighting factor, as defined in 
paragraph (f) of this section, to the interstate DEM factor. The state 
DEM factor is the ratio of the state DEM to the total DEM.
    (b) Beginning January 1, 1993, Category 3 investment for study areas 
with 50,000 or more access lines is apportioned to the interstate 
jurisdiction on the basis of the interstate DEM factor. Category 3 
investment for study areas with 50,000 or more access lines is 
apportioned to the state jurisdiction on the basis of the state DEM 
factor.
    (c)-(e) [Reserved]
    (f) Beginning January 1, 1998, for study areas with fewer than 
50,000 access lines, Category 3 investment is apportioned to the 
interstate jurisdiction by the application of an interstate allocation 
factor that is the lesser of either .85 or the sum of the interstate DEM 
factor specified in paragraph (a)(5) of this section, and the difference 
between the 1996 interstate DEM factor and the 1996 interstate DEM 
factor multiplied by a weighting factor as determined by the table 
below. The Category 3 investment that is not assigned to the interstate 
jurisdiction pursuant to this paragraph is assigned to the state 
jurisdiction.

------------------------------------------------------------------------
                                                               Weighting
       Number of access lines in service in study area           factor
------------------------------------------------------------------------
0-10,000.....................................................        3.0
10,001-20,000................................................        2.5
20,001-50,000................................................        2.0
50,001-or above..............................................        1.0
------------------------------------------------------------------------

    (g) For purposes of this section, an access line is a line that does 
not include WATS access lines, special access lines or private lines.
    (h) Effective July 1, 2001, through June 30, 2006, study areas 
subject to price cap regulation, pursuant to Sec. 61.41 of this 
chapter, shall assign the average balances of Accounts 2210, 2211, and 
2212 to Category 3, Local Switching Equipment, based on the relative 
percentage assignment of the average balances of Account 2210, 2211, 
2212, and 2215 to Category 3, during the twelve month period ending 
December 31, 2000.
    (i) Effective July 1, 2001, through June 30, 2006, all study areas 
shall apportion costs in Category 3, Local Switching Equipment, among 
the jurisdictions using relative dial equipment minutes of use for the 
twelve month period ending December 31, 2000.
    (j) If during the period from January 1, 1997, through June 30, 
2006, the number of a study area's access lines increased or will 
increase such that, under Sec. 36.125(f) the weighting factor would be 
reduced, that lower weighting factor shall be applied to the study 
area's 1996 unweighted interstate DEM factor to derive a new local 
switching support factor. The study area will restate its Category 3, 
Local Switching Equipment factor under Sec. 36.125(f) and use that 
factor for the duration of the freeze period.

[52 FR 17229, May 6, 1987, as amended at 53 FR 33011, 33012, Aug. 29, 
1988; 62 FR 32946, June 17, 1997; 63 FR 2124, Jan. 13, 1998; 66 FR 
33205, June 21, 2001; 69 FR 12549, Mar. 17, 2004; 71 FR 65745, Nov. 9, 
2006]